Wiki-Quellcode von LTO Treiber implementieren

Zuletzt geändert von René Schmidt am 2024/07/29 09:11

version	line-number	content
1.1	1	at first we open an Terminal Session:
	2
	3
	4
	5	In the demonstration, we show how to identify the device names in Linux using
	6
	7	Dmesg \|grep scsi
	8
	9
	10
	11
	12	And then use mtx command to load and unload tape and query the inventory of the tape libraries. Once the tapes are loaded we use tar to read and write data and mt to check the status of the drives.
	13
	14	The mtx commands are
	15
	16	~-~-- note: replace sg2 with the device name identified from
	17
	18	dmesg mtx f /dev/sg2
	19
	20	~-~-status ~-~- reports back slot status.
	21
	22	mtx -f /dev/sg2 unload 10 ~-~- unloads drive 0 to slot 10
	23
	24	~-~-Status
	25
	26	mtx -f /dev/sg2
	27
	28	~-~-The tar commands are
	29
	30	tar -cvf /dev/st0 *.txt
	31
	32	~-~-create a tar archive on tape device 0 of all txt files
	33
	34	tar -tvf /dev/sto
	35
	36	– list files on the tape
	37
	38	tar -xvf /dev/st0
	39
	40	– restore files back from tape to the current directory

Anwendungen